BAYKO Bases - Part No. 1!

BAYKO Bases - accessories? - well, I've had a few requests to put together some notes on Bases and couldn't really think of anywhere else that it would fit!
I don't think BAYKO Bases would have been the part which C. B. Plimpton would have been proudest of...
Page 4 of the first BAYKO manual showing the sides of the 'Base' are solid
...indeed there were problems, with Bases, even before BAYKO was launched.
This page from the very first manual [left] clearly displays evidence of this in that the model displayed is mounted on a wooden block, or something similar, rather than on a BAYKO Base.
There is further confirmation from an article in Games and Toys, February, 1935.
"This toy was perforce put on the market hurriedly owing to unexpected difficulties arising in the manufacture."
The most likely issue with Bases relates to problems arising during cooling, after they were ejected from the moulds.
Earliest type of BAYKO Base - note the complete lack of corner cutaways
The earliest BAYKO Bases [left - shown courtesy of Chris Reeve] had no cutaways at all in the corner - something Plimpton clearly worked on.
Early BAYKO Bases with the later, modified version on the left
The intermediate base [on the right of the right hand photo] has small cutaways in the corner, but uneven cooling still caused cracking and distortion problems.
The latest moulding [on the left of the photo] had much larger cutaways, allowing quicker cooling and less risk of cracking or distortion.
For those unfamiliar with the pre-war Bases these early examples are significantly different to the more familiar later ones : -
Pre-War BAYKO Base Links for the early large Bases
The size, 7.5 x 6 inches - 191 mm x 152 mm, was significantly larger than the later Bases.
2 Pre-War BAYKO Bases with a Brick positioned to highlight the missing row of rod holes
The Bases were fastened together with 3-hole Base Links.
When the Bases were joined, a complete row of rod holes was "missing" along the join - not a major issue at the time as there were no Long Bricks.
There was a matrix of 19 x 15 holes...
Rare Pre-War BAYKO Base in mottled green
...but the Base size was effectively 20 x 16 holes.
Pre-War BAYKO Base
Standard BAYKO set Bases [right] were brown, more consistently so than the Bricks of the same period.
In 1938, BAYKO sets #20 to #23 were introduced to showcase the range of new parts and included a suitably 'posh' Base [left], produced in mottled green.
The change to the 'New Series' sets in 1939 heralded a major period of change for BAYKO and that goes for Bases as well : -
Joined Small Bases with Brick across - note that the run of holes is unbroken across the join
The size, 5.25 x 3.75 inches - 132 mm x 95 mm, was only 43.75% of the size of the earlier Bases.
2 Base Links for the later small Bases - original style below, later style above
Bases were joined with smaller, 2-hole Base Links [right].
Linked Bases [left] now had an unbroken run of rod holes, better accommodating Long Bricks, etc.
There was a matrix of 14 x 10 holes.
Pre-war Bases were mottled green [below left].
The next piece of information about pre-war small Bases is slightly speculative...
Pre-War 'New Series' BAYKO Base in mottled green
...a small number of mottled green, pre-war, small bases have emerged like the one in the image [right] which, are significantly darker.
Dark mottled green small pre-war Base
I believe that they represent an experimental use of the "mottling mix" of the earlier, larger, mottled green Bases, used in the smaller mould.
Compare the three images for yourself and see what you think.
As a rule, though not foolproof, later mottled Bases are lighter than earlier ones.
BAYKO's post-war renaissance was plagued by material shortages, but typified by an 'adventurous' use of new forms of plastic, made from whatever materials could be acquired.
This is particularly evident in some of the earliest post-war Bases [right] which were made from a very unusual form of plastic...
Rare Post-War pale green BAYKO Base
...they were made in 2 similar colours...
...a pale blue and a pale green...
...and they are translucent with the look and feel of a block of soap!
These unusual Bases date from the early post-war years, in 1946 and 1947.
Although not all of today's BAYKO collectors actually like them, they are still highly collectable!
2 shades of green post-war Bases
There were then four further colours of BAKELITE used, by Plimpton, for BAYKO Bases : -
2 shades of grey post-war Bases
Two shades of grey, i.e. pale ones and dark ones. [right]
Two shades of green, i.e. yellowy and the more familiar mid green colour. [left]
Plimpton eventually settled, around 1948, on the mid green colour which was used until the 1959 MECCANO takeover.
One detail I haven't mentioned is the part number for these smaller Bases - 1B.
Early style of small Base
The initial mould [left] made for the smaller Bases has a moulding error - the figure "1", embossed on the underside of the Base, is reversed.
Later style of small Base
Clearly the mould itself, wrongly, had the "1" the normal way round.
Around 1949 this error was corrected [right]...
...and the corner moulding was strengthened.
Click on either of these 2 images to see more detail.
These distinctions allow you to distinguish the earlier bases from the later ones when the colour of the plastic is identical - just look for the reversed "1" and the corner moulding.
MECCANO era grey BAKELITE Base
MECCANO continued to manufacture BAYKO Bases in BAKELITE [left] for a brief period, probably until early 1961, but now they were in a pale grey colour.
2 colours of late MECCANO era plastic Bases
They then switched to a much lighter plastic which was produced in a pale olive grey colour [far right]...
...towards the end MECCANO reverted to pale grey in the same material [near right].
And that, I thought, was that...
...until I bought a MECCANO era set #14 - well actually it was sets #12 +#12C + #13C.
This surprised me at first, but I noticed that one of the four bakelite MECCANO era bakelite Bases had different diagonal reinforcing bars in each corner.
The two different mouldings of the MECCANO era bakelite Bases - note the thinner diagonal reinforcement bar on the left
The diagonal reinforcing bars on the first type of Base [left of the adjacent image] are just half the width of their counterparts [right of the adjacent image]. These Bases can also be distinguished by the full stop immediately to the right of the "o" in the embossed "No.1".
The type of Base on the right, with the thicker diagonal reinforcing bars, also has minor changes to the underside of the Rod slots and a strange rib along one side of the Base. These Bases have the full stop located immediately below the "o" in "Nọ1" and an additional full stop after the "B.".
Initially I thought that this was a late moulding change by MECCANO, which wouldn't have made much sense, but further research reveals that both versions were available throughout most of the post-war Plimpton era. The Bases with the thicker reinforcement are, almost certainly, produced from a second mould introduced some time in the early 1950s as sales increased.
 
The Bases weren't designed just to be used on their own, but to be fastened together, sometimes in large numbers, to produce larger models. For more on how this was achieved...
 
Below here are links to related info : -
 
Click on any of the links below for related information.
     
 
The 'Flaming BAYKOMAN' site logo